Hybridization Oven/Incubator


Key Features

  • Available as standrd incubator, or with rocking shaking or vortex functions.
  • 3.5” Large display
  • Touch screen & graphical control interface
  • User temperature calibration
  • Broad temp. control range
  • Timer with alarm function
  • Safety door switch device
  • Full accessories available
SKU: CSL-NHYB Category:
Special Requirements?


The CSL-NHYBRID incubators are a cost-effective system for homogeneous temperature control during routine incubations. Advanced ventilation design technology controlled by a digital microprocessor maintains temperature uniformity and stability to within 0.2°C. A stain resistant interior protects against spillages, while removable stainless steel mesh-shelves ensure that airflow remains unrestricted. Incubations may be set in precise 0.1°C increments under a continuous or programmable timer function.

A large 3.6″ colour-touchscreen control panel simplifies manipulation of speed, temperature and time within an easy to programme 3-line display, while a 32-bit microprocessor provides the temperature uniformity and stability necessary to support the most temperature-sensitive applications. With a robust metal chassis and fully stain-resistant interior, the HybridPRO range is designed to withstand the stresses of frequent daily usage.

The CSL-NHYBRIBVX has the same features as the CSL-NHYBRIDBASIC, but also includes a vortex platform for four microplates. The vortex platform is 20 x 30cm in size, and microprocessor-controlled to vibrate at speeds ranging from 50-1500 rpm.

The CSL-NHYBRIDROC includes a 27x20cm rocking platform to provide the perfect motion and tilt angle to prevent gels and membranes from drying out during staining, blocking and antibody incubations. Interchangeable hybridisation rotisseries may be exchanged for the rocking platform to allow the CSL-NHYBRIDROC to be customised for the full range of nucleic acid hybridisation applications, including Northern and Southern blotting techniques.

The CSL-NHYBRIDORB includes as standard a bi-directional 27 x 20cm orbital shaking platform that performs both clockwise and anticlockwise motion. Optional flask holders may be fitted to the orbital shaking platform to accommodate up to five 250ml or four 500ml flat-bottomed flasks, making the CSL-NHYBRIDORB a suitable bench top shaker for growing overnight cultures of bacteria, yeast and insect cells. The shaking-platform can be replaced by one of three hybridisation rotisseries ( purchased separately).

Catalogue Page Number: 74



1x Stainless steel mesh plate, 32.5 x 34.5cm, with 4x holders
Glass Bottle 40 x 150mm (diameter x length)
CSL-NHYBBT40X150 £118.00
Glass Bottle 40 x 200mm (diameter x length)
CSL-NHYBBT40X200 £141.00
Glass Bottle 40 x 300mm (diameter x length)
CSL-NHYBBT40x300 £141.00
1 x Rotisserie for 8 x 40mm glass tubes
CSL-NHYB-8RT £269.00
1 x Rotisserie for 16 x 50mm disposable conical tubes
CSL-NHYB-16RT £269.00
1 x Rotisserie for 24 x 15mm disposable conical tubes
CSL-NHYB-24RT £269.00
1 x 125ml flask holder without platform
CSL-NHYBFH-125 £34.00
1 x 250ml flask holder without platform
CSL-NHYBFH-250 £34.00
1 x 500ml flask holder without platform
CSL-NHYBFH-500 £34.00
Additional 27 x 20cm platform for orbital and reciprocal shaker
CSL-NHYB-P2320 £235.00
5 x 250ml flask holders without platform (only for NHYBRIDORB & NHYBRIDREC)
CSL-NHYBFH-250-SET £160.00
5 x 500ml flask holders without platform (only for NHYBRIDORB & NHYBRIDREC)
CSL-NHYBFH-500-SET £160.00
5 x 125ml flask holders without platform (only for NHYBRIDORB & NHYBRIDREC)
CSL-NHYBFH-125-SET £160.00
Flexible electrode holder (optional)
SH300 £128.00
Gradient Mixers
CSL-GM £325.00
CLIQS – Core Laboratory Image Quantification Software
CLIQ £1,050.00