Consort SP10T pH Electrode

£52.00

Key Features

  • built-in ATC (Pt1000)
  • 1m cable
  • 1 BNC connection
  • 2 banana connections for ATC
£52.00
SKU: SP10T Category:
Special Requirements?

Description

SP10T

Usage Body Junction Sealed pH °C size
General Epoxy Single yes 0…14 0…80 110xØ12
  • built-in ATC (Pt1000)
  • 1m cable
  • 1 BNC connection
  • 2 banana connections for ATC

Electrodes overview

Consort offers a wide variety high quality electrochemical analytical sensors. Our pH, ORP (Oxidation-Reduction Potential), Conductivity, Oxygen and Ion Selective Electrodes (ISEs) are designed for Laboratory, Industrial, Biotechnology and Medical applications.

The most common electrodes are in our catalogue. We can supply variations depending on your needs: body style, submersible, cable length, body length, connector type, ATC type,…

Most of our electrodes can be delivered from stock. ISE’s are never delivered from stock because of it’s limited shelf life. An ISE is manufactured on demand and as such will guarantee an ideal shelf life combined with a low price.

Tips and tricks

While calibrating or measuring, all solutions should be stirred gently to ensure the electrode gives a true representation of the beaker contents.

Calibration solutions with values near the expected sample value should be chosen. Only fresh calibration solutions should be used. Changing all solutions daily is a good practice. All solutions should be maintained at equal temperature.

Rinse the electrode twice between measurements: first thoroughly in distilled water and then with a small amount of the next sample to be measured. Allow the electrodes sufficient time to stabilise while calibrating or measuring. A stability indicator on all of our meters prompts the user when readings should be taken.